Advertisement
Section 4 Preparations for Debugging
The following item is selected in the [Mode] group box.
⎯ E10A-USB Multi Emulator
⎯ The E10A-USB Multi Emulator is activated for the selected device. Debugging of
programs can proceed.
(17)
[Connecting] dialog box is displayed, and the emulator connection will be started up.
If the "Connected" is displayed in the [Output] window of the High-performance
(18)
Embedded Workshop for the CPU1, starting up for the emulator is completed.
Rev. 1.00 Nov. 26, 2007 Page 46 of 230
REJ10J1766-0100
Figure 3.27 [Connecting] Dialog box
Advertisement
Troubleshooting
