Advertisement
Appendix D Notes on High-performance Embedded Workshop
Example:
5. Line Assembly
⎯ Input radix
Regardless of the Radix setting, the default for line assembly input is decimal. Specify H'
or 0x as the radix for a hexadecimal input.
6. Command Line Interface
⎯ Batch file
To display the message "Not currently available" while executing a batch file, enter the
sleep command. Adjust the sleep time length which differs according to the operating
environment.
Example:
⎯ File specification by commands
The current directory may be altered by file specifications in commands. It is
recommended to use absolute paths are recommended to be used to specify the files in a
command file so that the current directory alteration is not affected.
Example:
7. Memory Save During User Program Execution
Do not execute memory save or verifying during user program execution.
8. Load of Motorola S-type Files
This HEW does not support Motorola S-type files with only the CR code (H'0D) at the end of
each record. Load Motorola S-type files with the CR and LF codes (H'0D0A) at the end of
each record.
Rev. 1.00 Nov. 26, 2007 Page 222 of 230
REJ10J1766-0100
The function name is main.
main =
To display "Not currently available" during memory_fill
execution:
sleep d'3000
memory_fill 0 ffff 0
FILE_LOAD C:\Hew3\Tools\Renesas\DebugComp\Platform
\E10A-USBM\Tutorial\Tutorial\Debug_SHxxxx_E10A-USBM_
SYSTEM\tutorial.abs
Advertisement
Troubleshooting
