Advertisement
When the setting is completed, the [Event] window will be as shown in figure 6.41.
Soon after set the [Combination action (Sequential or PtoP)], Ch1 (IA_OA_CT) or Ch2
(IA_OA_DT) will be invalid. Select Ch1 (IA_OA_CT) or Ch2 (IA_OA_DT) individually, and
click the [Event] window with the right-hand mouse button and select [Enable].
Note: The items that can be displayed in this dialog box differ according to the product. For the
items that can be displayed, refer to the online help.
• Set the program counter and stack pointer values (PC = H'00000800 and R15 = H'FFF90000)
that were set in section 6.8, Setting Registers, in the [Register] windows of the High-
performance Embedded Workshops for CPU0 and CPU1. Click on the [Go] buttons of both
High-performance Embedded Workshops.
• If program execution is failed, reset the device and execute again the procedures above.
Figure 6.41 [Event condition] Page
Rev. 1.00 Nov. 26, 2007 Page 187 of 230
Section 6 Tutorial
REJ10J1766-0100
Advertisement
Troubleshooting
