Advertisement
Section 6 Tutorial
The [Status] window displays the following contents.
Figure 6.35 Displayed Contents of the [Status] Window (PC Break)
Note: The items that can be displayed in this window differ according to the product. For the
items that can be displayed, refer to the online help.
6.18
Hardware Break Function
A method is given below in which the address bus condition is set under Ch1 (IA_OA_DT_CT) as
hardware break conditions.
• Select [Eventpoints] from the [Code] submenu of the [View] menu of the High-performance
Embedded Workshop for CPU1. The [Event] window is displayed.
• The PC breakpoint that has been previously set is deleted. Click the [Event] window with the
right-hand mouse button and select [Delete All] from the popup menu to cancel all PC
breakpoints that have been set.
• To set a Ch1 (IA_OA_DT_CT) , click the [Event condition] tab.
Up to eleven breakpoints can be set independently for the hardware break condition, in the Event
conditions 1 to 11. In this example, set the hardware break condition for Ch1 (IA_OA_DT_CT) .
Note: The number of hardware break conditions differs according to the product. For the
number that can be specified for each product, refer to the online help.
Rev. 1.00 Nov. 26, 2007 Page 180 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
