Advertisement
5.5.10
Delete All
Removes all breakpoints.
5.5.11
Go to Source
Only enabled when one breakpoint is selected. Opens the [Source] window at the address of the
breakpoint.
5.5.12
[Breakpoint] Dialog Box
This dialog box specifies break conditions.
A breakpoint address to be set is specified in the [Value] edit box. The PC register can also be
specified such as #PC. Up to 255 breakpoints can be specified.
The contents to be set differ depending on the product. For details, refer to the on-line help for
each product.
Figure 5.15 [Breakpoint] Dialog Box
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 103 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
