Advertisement
3.1
Emulator Preparation
Unpack the emulator and prepare it for use as follows:
READ the reference sections shaded in figure 3.1 before
using the emulator product. Incorrect operation will damage
the user system and the emulator product. The USER
PROGRAM will be LOST.
Unpack the emulator
Check the components against the component list
Set up the emulator
- Install the emulator's software
(Check the components and register the user information.)
- Insert the emulator
- Set up the main unit of the emulator
Start the High-performance Embedded Workshop
Turn on the user system
Input the user system reset signal
Section 3 Preparation before Use
WARNING
Figure 3.1 Emulator Preparation Flow Chart
Section 3 Preparation before Use
Reference
Component list
When the emulator
is used first.
Section 3
Section 4
When the emulator
is used for second
time or later.
Rev. 1.00 Nov. 26, 2007 Page 19 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
