Advertisement
[Channel B]
[Read/Write]
[Start address]
: Sets an address range for the tracing of data
access. The start address is set here.
[End address]
: Sets an address range for the tracing of data
access. The end address is set here.
[Bus state]
: Sets a bus to acquire the window trace.
[M-Bus]
[DMAC]
Set the conditions to acquire the AUD trace.
[Read/Write]
: Sets tracing of read or write access or both.
[Read]
[Write]
[Read/Write]
[Start address]
: Sets an address range for the tracing of data
access. The end address is set here.
[End address]
: Sets an address range for the tracing of data
access. The end address is set here.
[Bus state]
: Sets a bus to acquire the window trace.
[M-Bus]
[DMAC]
Section 5 Debugging
on writing.
: Trace information is acquired
on reading and writing.
: Select the M-Bus.
: Select the DMA.
: Trace information is acquired
on reading.
: Trace information is acquired
on writing.
: Trace information is acquired
on reading and writing.
: Select the M-Bus.
: Select the DMA.
Rev. 1.00 Nov. 26, 2007 Page 123 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
