Section 4 Preparations for Debugging
6. The [Select Emulator mode] dialog box is displayed.
Select <name of the device in use>_CPU0 from the [Device] drop-down list box. The following
item is selected in the [Mode] group box.
⎯ E10A-USB Multi Emulator
The E10A-USB Multi emulator for the specified MCU is activated. Debugging the
program is enabled.
7.
The [Connecting] dialog box is displayed and connection of the emulator starts.
Rev. 1.00 Nov. 26, 2007 Page 40 of 230
REJ10J1766-0100
Figure 3.17 [Select Emulator mode] Dialog Box