Advertisement
(1) [General] page
Set the range for searching.
Figure 5.23 [Trace Find] Dialog Box ([General] Page)
[Trace search range]:
[No]:
[Upper search]:
[Start pointer]:
[End pointer]:
Note: Along with setting the range for searching, PTR values to start and end searching can be
set in the [Start PTR] and [End PTR] options, respectively.
Sets the range for searching.
Searches for information that does not match the conditions
set in other pages when this box is checked.
Searches upwards when this box is checked.
Enters a PTR value to start a search.
Enters a PTR value to end a search.
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 125 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
