Advertisement
Section 5 Debugging
5.7.5
Deleting All Measurement Conditions
Choose [Reset All] from the popup menu to delete all the conditions that have been set.
5.8
Synchronizing Multiple Debugging Platforms
Multiple debugging platforms can be operated at the same time in the High-performance
Embedded Workshop. Initiating a High-performance Embedded Workshop from another High-
performance Embedded Workshop synchronizes multiple debugging platforms. The High-
performance Embedded Workshop that initiates another High-performance Embedded Workshop
is called the master, and the initiated High-performance Embedded Workshop is called the slave.
Choose [Tools -> Launch Slave HEW...] or click the [Launch Slave HEW] toolbar button (
initiate a slave High-performance Embedded Workshop.
The slave High-performance Embedded Workshop has the same functionality as the master High-
performance Embedded Workshop.
The slave High-performance Embedded Workshop is notified of the following actions done in the
master High-performance Embedded Workshop to ensure synchronization of the slave High-
performance Embedded Workshop and the master High-performance Embedded Workshop.
• Reset go
• Go
• Stop debugging
Note: The master High-performance Embedded Workshop can initiate multiple slave High-
performance Embedded Workshop applications, but slave High-performance Embedded
Workshop applications cannot be nested (no slave High-performance Embedded
Workshop can initiate another slave High-performance Embedded Workshop).
When selecting [Renesas High-performance Embedded Workshop] -> [High-performance
Embedded Workshop] from [Programs] in the [Start] menu to initiate another High-performance
Embedded Workshop, two emulators can be used separately for debugging.
Rev. 1.00 Nov. 26, 2007 Page 144 of 230
REJ10J1766-0100
) to
Advertisement
Troubleshooting
