Advertisement
Section 4 Preparations for Debugging
(e) Core switch LED
(f) UVCC LED
(g) Host connector:
(h) User connector:
.
Note: Even if the LED is not lit, the USB is not disconnected or malfunctioned.
Emulator Host-side View:
(a)
Host-side connector:
Rev. 1.00 Nov. 26, 2007 Page 22 of 230
REJ10J1766-0100
Marked '3'. When this LED is lit, the E10A-USB Multi switches the
micro computer to be controled.
Marked '4'. When this LED is lit, the E10A-USB Multi is supplied
the UVCC .
Marked '
'. A connector for the host computer is provided at the
side of this mark.
Marked 'USER I/F'. A connector for the user system interface cable
is provided at the side of this mark.
Figure 3.4 Emulator Host-side View
A USB connector for the host computer. Be sure to connect the
provided USB cable.
Advertisement
Troubleshooting
