Advertisement
Section 5 Debugging
The settings of either the AUD trace (CPU0) or the AUD trace (CPU1)
Select the AUD trace conditions from the [Trace Settings] when the AUD function is selected.
[Branch trace]
[Window trace]
[Software trace]
When checking on the [Branch trace] of the [Trace settings], select the acquisition branch
conditions.
[Acquire normal branch instruction trace]
[Acquire subroutine instruction trace]
[Acquire exception branch instruction trace]
When checking on the [Window trace] of the [Trace settings], set the conditions for [Channel A]
and [Channel B] of the [Window trace] group box.
[Channel A]
Rev. 1.00 Nov. 26, 2007 Page 122 of 230
REJ10J1766-0100
: Trace information is acquired by the branch source and the branch
destination as conditions.
: Window trace functions. Memory access information is acquired
within the specified area.
[Channel A]
[Channel B]
: Software trace functions. Trace is acquired with the software trace
instructions.
: Set the conditions to acquire the AUD trace.
[Read/Write]
: Sets tracing of read or write access or both.
[Read]
[Write]
: Set whether acquire the
window trace information
from channel A or not.
: Set whether acquire the
window trace information
from channel B or not.
: Specify the normal branch as
the branch conditions.
: Specify the subroutine branch
as the branch conditions.
: Select the exception branch.
: Trace information is acquired
on reading.
: Trace information is acquired
Advertisement
Troubleshooting
