Adding And Removing Sessions - Renesas HS0005KCU04HE User Manual

• From the dialog box
1. Select [Debug -> Debug Sessions...]. This will open the [Debug Sessions] dialog box
(figure 4.17).
2. Select the session you want to use from the [Current session] drop-down list.
3. Click the [OK] button to set the session.
4.3.2

Adding and Removing Sessions

A new session can be added by copying settings from another session or removing a session.
• To add a new empty session
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Click the [Add...] button to display the [Add new session] dialog box (figure 4.18).
3. Check the [Add new session] radio button.
4. Enter a name for the session.
Figure 4.17 [Debug Sessions] Dialog Box
Section 4 Preparations for Debugging
Rev. 1.00 Nov. 26, 2007 Page 71 of 230
REJ10J1766-0100