Advertisement
5.5.27
Viewing the Source Line for Break Conditions
Select a break condition and choose [Go to Source] from the popup menu to open the [Source] or
[Disassembly] window at the address of the break condition. The [Go to Source] menu is only
available when one break condition that has the corresponding source file is selected.
5.6
Viewing the Trace Information
For the description on the trace function, refer to section 2.2, Trace Functions.
5.6.1
Opening the [Trace] Window
To open the [Trace] window, choose [View -> Code -> Trace] or click the [Trace] toolbar button
(
).
5.6.2
Acquiring Trace Information
The pop up menu of the [Trace window] has a [Settings...] item. If the [Settings...] item is
selected, the [Acquisition] dialog box will be displayed. If [I-Trace] is selected as the [Trace
Type] in this dialog box, the trace information will be acquired by using the internal trace
function.
The acquired trace information is displayed in the [Trace] window.
This window displays the following trace information items:
[PTR]
Figure 5.17 [Trace] Window (I-Trace)
Pointer to a location in the trace buffer (+0 for the last executed instruction)
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 107 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
