Advertisement
Section 5 Debugging
[Action]
Operation of the emulator when a break condition is satisfied
Break: Breaks program execution
Notes:
1.
PC breakpoints can only be set when all of synchronized execution, synchronized stepping,
and synchronized breaks have been selected.
2.
Do not set PC breakpoints at the same address in the High-performance Embedded
Workshops for CPU0 and CPU1.
3.
The details of settings differ from product to product. Refer to the online help system for
details on the settings for particular products.
When a breakpoint is double-clicked in this window, the [Breakpoint] dialog box is opened and
break conditions can be modified.
A popup menu containing the following options is available by right-clicking within the window.
5.5.5
Add
Sets breakpoints. Clicking this item will open the [Breakpoint] dialog box and break conditions
can be specified.
5.5.6
Edit
Only enabled when one breakpoint is selected. Select a breakpoint to be edited and click this item.
The [Breakpoint] dialog box will open and break conditions can be changed.
5.5.7
Enable
Enables the selected breakpoint(s).
5.5.8
Disable
Disables the selected breakpoint(s). When a breakpoint is disabled, the breakpoint will remain in
the list; when specified conditions have been satisfied, a break will not occur.
5.5.9
Delete
Removes the selected breakpoint. To retain the details of the breakpoint but not have it cause a
break when its conditions are met, use the Disable option (see section 5.5.8, Disable).
Rev. 1.00 Nov. 26, 2007 Page 102 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
