Extracting Function Calls From The Acquired Trace Information - Renesas HS0005KCU04HE User Manual

5.6.12

Extracting Function Calls from the Acquired Trace Information

To extract function calls from the acquired trace information, select [Function Call...] from the
popup menu. The [Function Call Display] dialog box will be displayed.
[Setting]: Selects whether or not to extract function calls.
[Enable]:
[Disable]:
When [Enable] is selected, only the cycles that include function calls are extracted for display
from the acquired trace information. The content of the trace buffer is not changed by extraction of
function calls. Using this function for the trace information that includes function calls allows the
user to know the order of function calls.
Figure 5.36 [Function Call Display] Dialog Box
Extracts function calls.
Does not extract function calls.
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 141 of 230
REJ10J1766-0100