Executing [Step Out] Command - Renesas HS0005KCU04HE User Manual

Section 6 Tutorial
6.15.2

Executing [Step Out] Command

The [Step Out] command steps out of the called function and stops at the next statement of the
calling statement in the main function.
To step out of the sort function, select [Step Out] from the [Debug] menu in the High-performance
Embedded Workshop for CPU1, or click the [Step Out] button on the toolbar. After that, select [Go] from
the [Debug] menu of the High-performance Embedded Workshop for CPU0, or click on the [Go] button on
the toolbar.
Note: It takes time to execute this function. When the calling source is clarified, use [Go To
Cursor].
Figure 6.25 [Step Out] Button
Rev. 1.00 Nov. 26, 2007 Page 171 of 230
REJ10J1766-0100