Advertisement
Section 5 Debugging
[I-Bus, CPU0]
[F-Bus, CPU0]
[M-Bus & Branch, CPU1]
[I-Bus, CPU1]
[F-Bus, CPU1]
[None]
[Acquisition]
: Set the conditions for acquisition of the internal trace information.
[Read]
[Write]
[PC relative addressing]
[Branch]
[Software]
[Data access]
[Instruction Fetch]
[When trace
: Specify the operation when the trace buffer is completely full.
buffer full]
Rev. 1.00 Nov. 26, 2007 Page 116 of 230
REJ10J1766-0100
: Trace information is acquired with I-bus
access by CPU0 as a condition.
: Trace information is acquired with F-bus
access by CPU0 as a condition.
: Trace information is acquired with M-bus
access and branching by CPU1 as
conditions.
: Trace information is acquired with I-bus
access by CPU1 as a condition.
: Trace information is acquired with F-bus
access by CPU1 as a condition.
: No conditions are set.
: Trace information is acquired on reading.
: Trace information is acquired on writing.
: Trace information is acquired with the
execution address.
: Trace information is acquired on the
branch.
: Software tracing is a condition.
: Trace information is acquired on data
access
: Trace information is acquired on cycles of
instruction fetching.
Advertisement
Troubleshooting
