Renesas HS0005KCU04HE User Manual page 63

Figure 3.22 [Can not find /RESET signal] Dialog Box
When the [Ignore] button is clicked, the emulator issues a reset in the CPU for initiation.
However, this method is unavailable for some products. For details, refer to section 2.2,
Specific Functions for the Emulator when Using the SHxxxx, in the additional document,
Supplementary Information on Using the SHxxxx.
13. If the "Connected" is displayed in the [Output] window of the High-performance Embedded
Workshop for CPU0, starting up the emulator is completed.
14. Double-click on the filename "HEW.exe" in the folder that was installed for CPU0 in section
3.4, Installing Emulator's Software.
Figure 3.23 [Output] Window
Section 3 Preparation before Use
Rev. 1.00 Nov. 26, 2007 Page 43 of 230
REJ10J1766-0100