Advertisement
Section 5 Debugging
In this window, the following items are shown on the left as line information.
The first column (Source address column): Address information
The second column (Event column): Event information (break condition)
The third column (S/W breakpoint column): PC, bookmark, and breakpoint information
Source address column
When a program is downloaded, an address for the current source file is displayed on the Source
address column. These addresses are helpful when setting the PC value or breakpoints.
Event column
The Event column displays the following item:
:An address condition for the break condition is set. The number of address conditions that can
be set is the same as that of break condition channels at which the address condition can be set,
but it differs depending on the product.
This is also set by using the popup menu.
The bitmap symbol above is shown by double-clicking the Event column. This is also set by using
the popup menu.
Rev. 1.00 Nov. 26, 2007 Page 88 of 230
REJ10J1766-0100
Figure 5.3 [Source] Window
Advertisement
Troubleshooting
