Setting The Sequential Break Condition - Renesas HS0005KCU04HE User Manual

Section 6 Tutorial
6.18.1

Setting the Sequential Break Condition

The emulator has sequential break functions.
Set hardware break conditions as follows:
Ch1 (IA_OA_DT_CT):
accessed.
Ch2 (IA_OA_DT_CT):
accessed.
Follow the setting method described in the previous section.
To set these breakpoints as sequential:
• Select [Combination action (Sequential or PtoP)] from the popup menu by clicking the [Event]
window with the right-hand mouse button. The [Combination action (Sequential or PtoP)]
dialog box will open.
Figure 6.40 [Combination action (Sequential or PtoP)] Dialog Box
Note: The items that can be displayed in this dialog box differ according to the product. For the
items that can be displayed, refer to the online help.
• Select [Break: Ch2-1] and click on the [OK] button.
Rev. 1.00 Nov. 26, 2007 Page 186 of 230
REJ10J1766-0100
A break condition is satisfied immediately after address H'00101050 is
A break condition is satisfied immediately after address H'00101042 is