Renesas HS0005KCU04HE User Manual page 93

• To remove a session
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Select the session you would like to remove.
3. Click the [Remove] button.
Note that the current session cannot be removed.
4. Click the [OK] button to close the [Debug Sessions] dialog box.
• To view the session properties
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Select the session you would like to view the properties for.
3. Click the [Properties] button to display the [Session Properties] dialog box (figure 4.19).
• To make a session read-only
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Select the session you would like to make read-only.
3. Click the [Properties] button to display the [Session Properties] dialog box (figure 4.19).
4. Check the [Read only] check box to make the link read-only. This is useful if you are
sharing debugger-setting files and you do not want data to be modified accidentally.
5. Click the [OK] button.
• To save a session with a different name
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Select the session you would like to save.
3. Click the [Save as...] button to display the [Save Session] dialog box (figure 4.20).
Figure 4.19 [Session Properties] Dialog Box
Section 4 Preparations for Debugging
Rev. 1.00 Nov. 26, 2007 Page 73 of 230
REJ10J1766-0100