Advertisement
Section 4 Preparations for Debugging
Figure 4.14 [Debug Settings] Dialog Box ([Options] Page)
The command chain that is automatically executed at the specified timing is registered. The
following four timings can be specified:
• At connecting the emulator
• Immediately after reset
• Immediately before downloading
• Immediately after downloading
Specify the timing for executing the command chain in the [Command batch file load timing]
drop-down list box. In addition, register the command-chain file that is executed at the specified
timing in the [Command Line Batch Processing] list box.
Rev. 1.00 Nov. 26, 2007 Page 68 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
