2. The Project Generator is started.
If you have purchased the toolchain, the following dialog box is displayed.
[Workspace Name] edit box:
[Project Name] edit box:
[CPU family] drop-down list box: Select the target CPU family.
[Tool chain] drop-down list box:
[Project type] list box:
Note: When [Demonstration] is selected in the emulator, note the following:
The [Demonstration] is a program for the simulator. When the generated program is used
by the emulator, delete the Printf statement.
Figure 4.7 [New Project Workspace] Dialog Box
Enter the new workspace name. Here, for example, enter
'test'.
Enter the project name. When the project name is the
same as the workspace name, it needs not be entered.
Select the target toolchain name when using the toolchain.
Otherwise, select [None].
Select the project type to be used.
Section 4 Preparations for Debugging
Rev. 1.00 Nov. 26, 2007 Page 61 of 230
REJ10J1766-0100