Modifying The Assembly-Language Code - Renesas HS0005KCU04HE User Manual

5.2.4

Modifying the Assembly-Language Code

You can modify the assembly-language code by double-clicking on the instruction that you want
to change. The [Assembler] dialog box will be opened.
The address, machine code, and disassembled instruction are displayed. Enter the new instruction
or edit the current instruction in the [Mnemonic] field. Pressing the [Enter] key will assemble the
instruction into memory and move on to the next instruction. Clicking the [OK] button will
assemble the instruction into memory and close the dialog box. Clicking the [Cancel] button or
pressing the [Esc] key will close the dialog box.
Note: The assembly-language display is disassembled from the machine code on the actual
memory. If the memory contents are changed, the dialog box (and the [Disassembly]
window) will show the new assembly-language code, but the display content of the
Figure 5.6 [Disassembly] Window
Figure 5.7 [Assembler] Dialog Box
Section 5 Debugging
Rev. 1.00 Nov. 26, 2007 Page 91 of 230
REJ10J1766-0100