Advertisement
Note: Since the displayed contents differ depending on the product, refer to each product's
online help. Some MPUs supported may not have the AUD trace function.
It is possible to hide any column not necessary in the [Trace] window. Selecting a column you
want to hide from the popup menu displayed by clicking the right-hand mouse button on the
header column hides that column. To display the hidden column, select the column from the said
popup menu again. Dragging the column with the mouse can change the display order.
5.6.3
Specifying Trace Acquisition Conditions
The capacity of the trace buffer is limited. When the buffer becomes full, the oldest trace
information is overwritten. Setting the trace acquisition condition allows acquisition of useful
trace information and effective use of the trace buffer.
The trace acquisition condition is set in the [Acquisition] dialog box that is displayed by selecting
[Acquisition...] from the popup menu.
Settings other than those in the [Display Type] group box are common to the High-performance
Embedded Workshops for CPU0 and CPU1. Settings in the [Display Type] group box are not
common to the High-performance Embedded Workshops for CPU0 and CPU1.
The [Acquisition] dialog box has the following pages:
Table 5.1
[Acquisition] Dialog Box Pages
Page
[Trace mode]
[AUD Trace (CPU0)]
[AUD Trace (CPU1)]
Notes: 1. This dialog box is not supported by the products that do not support the AUD trace
function.
2. Some products do not support this page. For details, refer to the online help for each
product.
Item
Sets trace acquisition conditions.
Sets the AUD trace conditions for CPU0. *
Sets the AUD trace conditions for CPU1. *
Section 5 Debugging
1
2
*
1
2
*
Rev. 1.00 Nov. 26, 2007 Page 111 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
