Advertisement
Section 4 Preparations for Debugging
5. Click the [OK] button to close the [Debug Sessions] dialog box.
6. This creates a file with the name entered in step 4. If a file with this name already exists,
an error is displayed.
• To import an existing session into a new session file
1. Select [Debug -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.17).
2. Click the [Add...] button to display the [Add new session] dialog box (figure 4.18).
3. Check the [Use an existing session file] radio button.
4. Enter a name for the session.
5. Enter the name of an existing session file that you would like to import into the existing
project or click the [Browse] button to select the file location.
If the [Open and maintain link to session file] check box is not checked, the imported new
session file is generated in the project directory.
If the [Open and maintain link to session file] check box is checked, a new session file is
not generated in the project directory but is linked to the existing session file.
If the [Make session file link read only] check box is checked, the linked session file is
used as read-only.
6. Click the [OK] button to close the [Debug Sessions] dialog box.
Rev. 1.00 Nov. 26, 2007 Page 72 of 230
REJ10J1766-0100
Figure 4.18 [Add new session] Dialog Box
Advertisement
Troubleshooting
