Advertisement
(5) Displaying the variable contents
The variable contents specified in the user program are displayed.
(6) Monitoring function
In some devices to be debugged, memory contents can be monitored during user program
execution. For details on the specifications of each product, refer to the online help.
(7) Other memory operation functions
Other functions are as follows:
• Memory fill
• Memory copy
• Memory save
• Memory verify
• Memory search
• Internal I/O display
• Cache table display and edit (only for devices incorporating caches)
• TLB table display or edit (only for devices incorporating MMU)
• Displaying label and variable names and their contents
For details, refer to the online help.
Notes:
1. Memory access during user program execution:
When memory is accessed from the memory window, etc. during execution of the
user program, execution stops for the memory access and is then resumed. Therefore,
realtime emulation cannot be performed.
The stopping time of the user program is as follows:
Environment:
Host computer: 3 GHz (Pentium® 4)
SH7265: CPU clock 66.6 MHz
JTAG clock: 2.5 MHz
When a one-byte memory is read from the command-line window, the stopping time
will be about 8 ms.
2.
Memory access during user program break:
The program can also be downloaded for the flash memory area by the emulator.
Other memory write operations are enabled for the RAM area and the internal flash
Section 2 Emulator Functions
Rev. 1.00 Nov. 26, 2007 Page 17 of 230
REJ10J1766-0100
Advertisement
Troubleshooting
