Advertisement
The High-performance Embedded Workshop provides a graphical user interface that eases the
development and debugging of applications written in the C/C++ programming languages or
assembly language for Renesas microcomputers. Its aim is to provide a powerful yet intuitive way
of accessing, observing and modifying the debugging platform on which the application is
running.
The E10A-USB Multi emulator (hereafter referred to as the emulator) is a support tool for
developing the hardware and software of application systems running on Renesas original
microcomputers.
The main unit of the emulator is connected, through the dedicated debugging interface, to the user
system. The user system can be debugged under the conditions similar to the actual application
conditions. The emulator enables debugging anywhere indoors or out. The host computer for
controlling the emulator must be an IBM PC compatible machine with USB 1.1/2.0 (Full-Speed).
Figure 1.1 shows the system configuration using the emulator.
Host computer (with USB interface)
CD-R
High-performance
Embedded Workshop
Section 1 Overview
Connected to
the USB connector
Connected to
the USB connector
Figure 1.1 System Configuration with the Emulator
USB cable (1.5 m)
E10A-USB Multi emulator
User system connector
Rev. 1.00 Nov. 26, 2007 Page 1 of 230
Section 1 Overview
User system interface cable
(38 pins or 14 pins)
Multi-core microcomputer
User system
REJ10J1766-0100
Advertisement
Troubleshooting
