Advertisement
Section 4 Preparations for Debugging
3.10
System Check
When the software is executed, use the procedure below to check that the emulator is connected
correctly. Here, use the workspace for a tutorial provided on the product.
Refer to section 4, Preparations for Debugging, for the other activating method to create a new
project or use an existing workspace.
1. Connect the emulator to the host computer.
2. Connect the user system interface cable to the connector of the emulator.
3. Connect the user system interface cable to the connector in the user system.
4. Double-click on the "HEW2.exe" from the folder that is installed for CPU0 in section 3.4,
Installing Emulator's Software.
5. [Welcome!] dialog box is displayed.
[Create a new project workspace] radio button:
[Open a recent project workspace] radio button:
[Browse to another project workspace] radio button: Uses an existing workspace; this radio
To use a workspace for the tutorial, select the [Browse to another project workspace] radio button
and click the [OK] button.
Rev. 1.00 Nov. 26, 2007 Page 38 of 230
REJ10J1766-0100
Figure 3.15 [Welcome!] Dialog Box
Creates a new workspace.
Uses an existing workspace and displays
the history of the opened workspace.
button is used when the history of the
opened workspace does not remain.
Advertisement
Troubleshooting
