Danger - First Test Run May Cause Injury Or Damage - ABB DressPack IRB 6700 Product Manual

1 Safety

1.4.2 DANGER - First test run may cause injury or damage!

1.4.2 DANGER - First test run may cause injury or damage!
Description
Since performing a service activity often requires disassembly of the robot, there
are several safety risks to take into consideration before the first test run.
Elimination
Follow the procedure below when performing the first test run after a service
activity, such as repair, installation, or maintenance.
Running the robot without fulfilling the following aspects, may cause severe
damage to the robot.
1
2
3
4
5
6
7
Collision risks
When programming the movements of the robot, always identify potential collision
risks before the first test run.
48
DANGER
Action
Remove all service tools and foreign objects from the robot and its working area.
Verify that the robot is secured to its position, see installation section in the product
manual for the robot.
Verify that any safety equipment installed to secure the robot arm position or restrict
the robot arm motion during service activity is removed.
Verify that the fixture and work piece are well secured, if applicable.
Install all safety equipment properly.
Make sure all personnel are standing at a safe distance from the robot, that is out of
its reach behind safety fences, and so on.
Pay special attention to the function of the part that previously was serviced.
CAUTION
© Copyright 2014-2017 ABB. All rights reserved.
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F