8
9
10
11
12
13
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
Connect the hose of the shop water drain to the
water-return circuit.
Turn on the water supply to the Water and Air unit.
Activate the electrical valve.
First turn on and then turn off the shop water drain.
Wait a couple of minutes and check for leakage.
Turn on the shop water drain.
© Copyright 2014-2017 ABB. All rights reserved.
4.3.3 Replacement of Water-return circuit
Note
This is done in order to evacuate
all air in the circuit.
Tighten if there is any leakage.
4 Repair
Continued
205