ABB DressPack IRB 6700 Product Manual page 88

2 Installation
2.5 Fitting the process turning disc
Continued
5
Concluding procedure
1
88
Action
IRB 6700 -300/2.70, -245/3.00.
Secure the process turning disc with its
attachment screws and washers.
Action
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
- First test run may cause injury or damage!
on page 48.
© Copyright 2014-2017 ABB. All rights reserved.
Note
Tightening torque: 70 Nm
Screw dimension: M10x25, Steel 12.9
Gleitmo 603, (21 pcs)
Washers: Steel 11x17x25 (21 pcs)
xx1400001395
Note
DANGER
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F