Fitting the attachments - IRBDP MH3 UE
Use this procedure to install the attachments.
1
2
3
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
DANGER
Make sure that all supplies for electrical,
water pressure and air pressure are turned
off, before entering the robot working area.
Fit the bracket right.
Only valid with upper arm extension!
Fit the bracket right on the arm extension.
© Copyright 2014-2017 ABB. All rights reserved.
2.4.1 Fitting attachments of the IRBDP MH3 UE
Note
Lock screws with locking liquid, Loctite
243.
xx1400000093
Screw dimension:
•
M8x16 8.8-A2F (2 pcs)
Lock screws with locking liquid, Loctite
243.
xx1400000218
Screw dimension:
•
M8x16 8.8-A2F (2 pcs)
2 Installation
Continued
67