ABB DressPack IRB 6700 Product Manual page 119

Final check of protective sleeve.
1
2
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
2.6.4 Fitting the cable packages IRBDP MH6 UI and IRBDP SW6 UI (Lean ID)
Action
In order to be sure that the protective
sleeve still is in the correct position, check
its position after some hours running. This
is done to prevent the protection hose from
wear. See figure!
If required, adjust the position of the pro-
tective sleeve.
© Copyright 2014-2017 ABB. All rights reserved.
2 Installation
Note
xx1400000224
Continued
119