ABB DressPack IRB 6700 Product Manual page 92

2 Installation
2.6.1 Fitting the cable package IRBDP MH3 UE
Continued
6
7
8
Connecting and fitting on the upper arm
1
Continues on next page
92
Action
Apply grease on the highlighted area, so that
the cable package inside the tube is covered
with cable grease all the way through. See
figure!
Use caution and push the cable package
back in through the insert and into its
mounting position in the tube.
Note
Make sure the cables and hoses are not
twisted through the upper arm.
Action
Connect the cable package to the connec-
tion plate.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
© Copyright 2014-2017 ABB. All rights reserved.
Note
xx1400001390
xx1400001150
Note
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
xx1400000225
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F