ABB DressPack IRB 6700 Product Manual page 141

Shop compressed air supply
Use this procedure to connect the Water and Air unit to the shop compressed air
supply.
1
Water drain connection, One water return
Use this procedure to connect the water drain connection with one water return,
to the Water and Air unit.
1
2
Water drain connection, Two water return
Use this procedure to connect the water drain connection with two water return,
to the Water and Air unit.
1
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
Connect the air hose to the fitting with a
G½" thread on the air shut off valve (C).
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Action
Route the water drain hose through the
lower hole in the mounting plate.
Connect the hose to the fitting with a G½"
thread on the check-valve.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Action
Connect the hose to the bulkhead fitting
with a G½" thread.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Note
Any rotation of the bulkhead fitting must be
avoided when mounting. Hold the outer part
of the bulkhead fitting with a suitable tool,
in order to prevent rotation.
© Copyright 2014-2017 ABB. All rights reserved.
2 Installation
2.13.1 Installation of Water and air unit
Note
Note
xx0600003348
• B: Water drain connection, one
water return
Note
xx0600003349
Parts:
• H: Bulkhead fitting
• I: Outer part of bulkhead fitting
Continues on next page
Continued
141