ABB DressPack IRB 6700 Product Manual page 207

6
7
8
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
Fit the baffle by inserting it to the filter element.
Mind the fitting direction of the baffle (convex to
which the element goes).
Tighten the baffle to settle the baffle, filter element
and deflector by rotating the baffle counterclockwise
until it contacts the element and deflector lightly.
Rotate approximately one half revolution counter-
clockwise further in order to tighten them.
Fit the bowl assembly.
Match the mating mark of the body and the bowl
assembly to insert the assembly to the body. Rotate
the assembly 45° (right or left) until the lock button
is tossed up to fit the bowl assembly.
© Copyright 2014-2017 ABB. All rights reserved.
4.3.4 Replacement of Air filter element
Note
Baffle direction: Convex, facing
the filter element.
Tightening torque: 0.9 Nm
Note
Check that the lock button has
tossed up!
4 Repair
Continued
207