2 Installation
2.13.1 Installation of Water and air unit
Continued
Do not tighten the brass couplings for water
and air with excessive force.
xx1300002327
Item in figure
A
B
Shop water supply
Use this procedure to connect the Water and Air unit to the shop water supply.
1
2
Continues on next page
140
CAUTION
Connect to:
Shop water supply
Shop water drain
Note! In case of a second water
return, the water drain connection
is moved to the outside of the
mounting plate!
Action
Route the water supply hose through the
upper hole in the mounting plate.
Connect the hose to the fitting with a G½"
thread on the solenoid valve (A).
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
© Copyright 2014-2017 ABB. All rights reserved.
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
Function:
Note
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F