ABB DressPack IRB 6700 Product Manual page 99

10
11
12
13
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
Fit the R1.CP/CS cable to the customer
plate.
Secure the R1.CP/CS connector.
Connect the rest of the cable and hose
connectors to the customer plate.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Secure the cable package with the velcro
straps and straps on the balancing device.
Fit the straps (securing the cable harness
to the side bracket) and velcro strap.
© Copyright 2014-2017 ABB. All rights reserved.
2.6.2 Fitting the cable package IRBDP MH3 LI
Note
xx1400001142
xx1400001143
Screw dimension:
• M6x20 8.8-A2F (2 pcs)
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
Re-check all cables and hoses for straining
or twisting.
Reroute if necessary!
xx1200000047
Continues on next page
2 Installation
Continued
99