ABB DressPack IRB 6700 Product Manual page 193

4
5
6
7
8
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
4.2.5 Replacing the protection hose IRBDP SW6 UI and IRBDP MH6 UI
Action
Use caution and push cables and hoses
into the protection hose.
Make sure that cables and hoses are not
twisted.
Fit the cable and hose retainer.
Arrange the cables and hoses and put them
in their position in the cable and hose re-
tainer.
Secure the cable and hose retainer with
the hose clamp.
© Copyright 2014-2017 ABB. All rights reserved.
Note
Best performed in this order:
1 Cables with the biggest connectors
2 Hoses
3 Cables with the smallets connectors.
xx1400000349
PROC 4
SP
CPS
WELD EARTH
WELD V WELD U
xx1200000106
This is an example showing the Paracom
cable harness. If in doubt check the posi-
tions on a cable and hose retainer that still
is fitted.
xx1400000348
Continues on next page
4 Repair
Continued
PROC 3
PROC 2
FB7
PROC 1
193