ABB DressPack IRB 6700 Product Manual page 171

Spare parts
The following equipment is required for the replacement of the lower arm internal
MH dressing cable package IRBDP MH6 LI.
Spare part
Lower arm dressing cable package
IRBDP MH3 LI
Required tools and equipment
The following equipment is required for the replacement of the cable package
IRBDP MH3 LI.
Equipment
Standard toolkit, DressPack/Spot-
Pack
Other tools and procedures may be
required. See references to these
procedures in the step-by-step in-
structions below.
Removing the cable package
Use this procedure to remove the cable package IRBDP MH3 LI.
1
2
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
DANGER
Turn off all:
• electric power supply
• water pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
CAUTION
The cable package is sensitive to mechanical
damage. They must be handled with care, espe-
cially the connectors, in order to avoid dam-
aging them.
© Copyright 2014-2017 ABB. All rights reserved.
4.2.2 Replacing the cable package IRBDP MH3 LI
Spare part num- Note
ber
For spare part
number see
chapter:
• Spare parts
on page221.
Art. no Note
3HAC17290-7 The contents are defined in sec-
tion
Pack on page
These procedures include refer-
ences to the tools required.
Note
4 Repair
Continued
Toolkits, DressPack/Spot-
217.
Continues on next page
171