ABB DressPack IRB 6700 Product Manual page 87

Refitting the process turning disc
1
2
3
4
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
Wipe clean the contacts surfaces.
Foundry Plus:
Apply Mercasol on the surfaces on the
process turning disc and axis-6 gearbox
as shown in the figure.
IRB 6700 -235/2.65, -205/2.80, -175/3.05, -
150/3.20.
Secure the process turning disc with its
attachment screws and washers.
IRB 6700 -200/2.60, -155/2.85.
Secure the process turning disc with its
attachment screws and washers.
© Copyright 2014-2017 ABB. All rights reserved.
2 Installation
2.5 Fitting the process turning disc
Note
xx1400000385
The figure show standard turning disc.
Surfaces to apply Mercasol on are the
same with process turning disc.
Tightening torque: 35 Nm.
Screw dimension: M8x25, Steel 12.9
Gleitmo 603 (24 pcs)
Washers: Steel 8.4x13x1.5 (24 pcs)
xx1400001392
Tightening torque: 70 Nm
Screw dimension: M10x25, Steel 12.9
Gleitmo 603, (9 pcs)
Washers: (3 pcs)
xx1400001394
Continues on next page
Continued
B
A
87