ABB DressPack IRB 6700 Product Manual page 167

Required tools and equipment
Equipment, etc.
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Removing the cable package IRBDP MH3 UE
Use this procedure to remove the cable package.
1
2
3
Product manual - DressPack/SpotPack IRB 6700
3HAC044270-001 Revision: F
Action
DANGER
Turn off all:
• electric power supply
• water pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
CAUTION
The cable package is sensitive to mechan-
ical damage. They must be handled with
care, especially the connectors, in order to
avoid damaging them.
Open the velcro strap on the bracket right.
© Copyright 2014-2017 ABB. All rights reserved.
4.2.1 Replacing the cable package IRBDP MH3 UE
Art. no.
-
Note
xx1400000097
4 Repair
Continued
Note
Content is defined in section
Standard toolkit on page 217.
These procedures include
references to the tools re-
quired.
Continues on next page
167