Instrument Cluster Panel - Side - New Holland B95CTC Operator's Manual

Instrument cluster panel – Side
1. Front work light switch
This switch has three positions:
The first position is OFF (control lamp off).
•
Second position, by pressing the symbol side
•
(first click), cluster (5) turn on, switches back-
lighting turnings on and the outer front work
lights are turned on (control lamp on).
Third position, by pressing the symbol side
•
again (second click), the inner front work lights
are turned on too (control lamp on).
3 - CONTROLS/INSTRUMENTS
1
LEEN12T0552FA_1
2.
3 - 26
"Glide ride" switch (optional on 2WD models)
The "glide ride" system control improves the ma-
chine comfort during travel, regardless of the type
of terrain and with the loader bucket full or empty.
It reduces forward and rearward pitching when mov-
ing rearwards or forwards and when carrying loads,
at the same time increasing productivity and opera-
tor comfort.
It also reduces impact forces to the machine during
operation. Do not use this system while operating
the loader attachment.
ATTENTION: Never operate the "glide ride" system
control when the loader arm and loader bucket are
maintaining the front of the machine raised off the
ground. The machine could fall and cause serious
or fatal injury.