Parking Brake Lever - New Holland B95CTC Operator's Manual

Parking brake lever

The parking brake is a Spring Applied Hydraulic Released
(SAHR) brake.
WARNING
Loss of control hazard!
To prevent inadvertent machine movement,
take care to avoid accidental contact with
the gearshift levers. Always stop the engine,
firmly apply the parking brake, and place all
gearshift levers in neutral before leaving the
machine.
Failure to comply could result in death or se-
rious injury.
The parking brake should be applied if the engine is
stopped. The parking brake is always engaged when the
ignition switch is turned "OFF".
At start up, cycle the switch from the park emblem to the
O emblem. Cycle the switch, regardless of the position
the switch (1) was in at startup..
Press to engage the parking brake [the control lamp
(2) on the side instrument turns on]
Press to release the parking brake [the control lamp
(2) on the side instrument turns off].
ATTENTION: a failure in the operating procedure or a
failure in the electrical or hydraulic function can result in
abrupt engagement of the parking brake. Always wear
your seat belt.
3 - CONTROLS/INSTRUMENTS
W0130A
3 - 14
1
LEEN12T0541AA
2
LEEN12T0542AA