Instrument Cluster Panel - Side - New Holland B95C Original Instructions Manual

Instrument cluster panel – Side
(1) Front work lights
Front work light switch: This switch has three positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side (first click) the outer front work lights are turned on
(control lamp on).
• Third position, by pressing the symbol side again (second click) the inner front work lights are turned
on too (control lamp on).
(2) Driving lights
Driving light switch: This switch has three positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side (first click) the instrument cluster panel is powered, the
side lights and the low beam indicator lamp are turned on (control lamp on).
• Third position, by pressing the symbol side again (second click) the high beams are enabled and the
low beams and the low beam indicator lamp are turned on (control lamp on).
3 - CONTROLS AND INSTRUMENTS
LEEN11T0021FA
3-22
1