Exterior Controls; Rotating Beacon - Optional; Battery Master Switch - New Holland B95CTC Operator's Manual

3 - CONTROLS/INSTRUMENTS

EXTERIOR CONTROLS

Rotating beacon – Optional
The rotating beacon (1) should be placed on the cab roof
and the cable connected to one of the 12 V sockets over
the door on each side of the machine.
NOTICE: The rotating beacon must be installed and op-
erated when undertaking road travel.
1
LEEN12T0550AA

Battery master switch

NOTE: The battery master switch must be switched off at
the end of each working day, for machine service or for
any operations on the electrical system.
It acts as an anti-theft device when the cab doors and
windows are locked.
The battery master switch (1) is located in the battery com-
partment and is used to completely disconnect the battery
from the electrical system.
When the battery master switch has an inclination of 45°,
the circuit is disconnected.
When the master switch is in vertical position, the circuit
1
MOLI12LBB0153AB
is connected.
3 - 23