Hydraulic oil level
Move the machine to a level and firm ground.
Lower the loader attachment to the ground.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Release any possible residual pressure from the hydraulic
system by moving the control levers in all directions.
Check the hydraulic oil level in the tank (1) by means of
the level gauge (3) after waiting for the oil to cool down,
reaching the ambient temperature.
The hydraulic oil level must reach at least the half of the
gauge (3).
If necessary, top up.
NOTICE: even when its level is insufficient, a small quantity
of hydraulic oil remains in the lower part of the gauge. This
does not mean that the level is sufficient.
7 - MAINTENANCE
7 - 18
1
LEEN12T0640AA
2
LEEN12T0565AA