Display Switches
Switches provided for operator / service input:
UP/DOWN switch
Use this UP/DOWN switch to scroll through the menus.
NOTE: Push the UP arrow at start-up to display the engine
rpm on the digital display.
Display enter switch
Use this switch to select between display and service
menus or enter selections.
The top portion of the switch is used to select the displays.
The 90 ° arrow icon or the bottom portion of the switch is
used to confirm the selected choices.
Using the display switches, you will be able to scroll through the following:
Battery voltage
•
Backhoe loader hours
•
Setup
•
Features adjustable during setup:
Backlighting dimming and contrast control
•
Maintenance/service interval customization
•
Storage of error codes
•
Low temperature idle speed setting:
•
When the engine coolant temperature is below 10 °C (50 °F), the unit will change from a normal low idle to a low
temperature idle which can be adjusted between 975 RPM and 1500 RPM. The default setting is 1000 RPM
High idle speed setting ( 2500 RPM maximum)
•
3 - CONTROLS/INSTRUMENTS
3 - 28
1
MOLI12LBB0097AA
2
MOLI12LBB0096AA